Nanoscale Infrared Spectroscopy

Polymeric Films, Monolayers and Blends

Delivering true, model-free nanoscale FTIR spectra for polymers

Bruker's nanoIR systems provide unrivaled nanoscale FTIR spectroscopy, chemical and material property mapping capabilities, delivering true, model free nanoscale FTIR spectra for a wide range of polymers. Applications include:

Polymer blends
Polymeric multilayer films
Nanocomposites
Bio-polymers, nanofibers
Polymeric thin films and interfaces
Particles, defects and contaminants

The integration of atomic force microscopy capabilities uniquely provides correlation of nano FTIR spectra and chemical imaging with AFM-based topography, nanomechanical and nanothermal material property mapping.

Block Copolymer

Tapping AFM-IR provides high resolution chemical imaging of PS/PMMA copolymer at 1730 cm⁻¹ and 1492 cm⁻¹. The images are combined to show chemical contrast.

Block Copolymer

Tapping AFM-IR demonstrates sub 10 nm imaging resolution on block copolymer substrate of PS/PMMA, as shown in cross-section.

Polymer Blend

AFM-IR spectra (left) and morphology (right) of a polymer blend across a rubber/nylon interface, demonstrating the high chemical spatial resolution of AFM-IR.

Polymer Blend: Sulfur Containing Poly(arylene)

在多个AFM-IR光谱和红外化学映射wavenumbers of a sulfur-polyarylene blend. Correlated topography and nano-mechanical property mapping are shown.

Polymeric Multilayer Film

The correlation of AFM-IR to transmission FTIR allows unambiguous identification of sub-micron layers in multilayer films. Above: AFM-IR point series spectra of a multilayer film with corresponding topography image.

Nanocomposites

IR spectra and imaging of SiO₂ nanoparticles in polypropylene, showing aggregation of the SiO₂ and non-uniform distribution. Image courtesy of IPF Dresden.

Interface Analysis of Composites

nanoIR measurements on a carbon fiber-epoxy composite, revealing variations in chemical composition across the fiber/epoxy interface.

Polymer Nano Fibers

Data courtesy of Liang Gong, John Rabolt, and Bruce Chase, University of Delaware.

Kevlar Fiber

AFM-IR spectra (left) of a single microfilament (~1.3 µm) of a kevlar fiber.

Nanoscale Molecular Orientation

AFM-IR spectra on electrospun PVDF fibers under two different IR polarizations (R) IR absorption image at 1404 cm⁻¹ of crossed PVDF fibers under polarized illumination (polarization direction shown by arrow).

Polymer Degradation/Failure

AFM-IR absorption spectra reveal evidence of localized nanoscale oxidation caused by environmental stress cracking in a polyurethane insulation for a pacemaker lead.

Thin Polymer Films

Resonance enhanced AFM-IR enables high quality measurements on very thin films. Above: A 20 nm film on PMMA with AFM-IR spectra (right).

Polymer Interfaces

AFM-IR spectra (left) and AFM image (center) of the interface between polyethylene and polyamide. At the interface, a shift in the CH stretch peak position and width is seen, indicating a difference in the molecular orientation.

Biorenewable Polymer

IR spectra of locally heat treated polyhydroxybutyrate (PHB) reveal variations in crystalline/amorphous content (C-O-C stretches, 1270 cm⁻¹).

Nanomechanical Property Mapping of Polymer Blends

Lorentz Contact Resonance (LCR) simplifies component selective imaging in polymer blends. Above: Height (left) and LCR images (center, right) of a blend of polystyrene (PS) and low density polyethylene (LDPE). The LCR images were obtained at two different contact resonance frequencies corresponding to strong resonances of the PS (center) and LDPE (right).

Nanoscale Thermal Analysis of Polymer Blends

Nanothermal analysis (left) and Lorentz Contact Resonance image (right) on a multilayer film. The LCR image clearly discriminates the polymer layers such that local glass transition temperatures can be measured on specific layers.

Polymeric Films, Monolayers and Blends

Key Publications

Recent Webinars

More Information

Related Products

^_NEWDimension IconIR

Anasys nanoIR3

Anasys nanoIR3-s

Anasys nanoIR3-s Broadband

Nanoscale Infrared Spectrometers