D8 ENDEAVOR

Not only is the D8 ENDEAVOR made for rough 24/7 operation. Under the hood you will find the finest Bruker XRD technology that is key for satisfying highest analytical demands.

• Dynamic Beam Optimization (DBO) – no instrument reconfiguration by the operator needed. Motorized optics optimally adapt the beam-path geometry to the measurement conditions needed for various materials
• LYNXEYE detectors – highest data quality and lowest quantification limits. The energy discriminating LYNXEYE XE-T detector exhibits unprecedented fluorescence and white beam residue suppression, high count rate capability paired with excellent angular resolution. And, there is no more need for secondary monochromators or primary Kß filters.

• Sample handling – High sample turnaround is achieved by unloading the previous and preloading the next sample while the current analysis is running. New samples can be put into the sample changer while the measurements are running without exposure of the operator to X-ray radiation.

Turn-key versions of the D8 ENDEAVOR are available for the cement, minerals, pharmaceutical, Aluminum, and metals industries.

他们包括：

• instrument configurations that are tailored to the specific requirements of those industries,
• optimized data acquisition and evaluation packages,
• 特定于行业的应用培训和支持。

如今，XRD与Topas Rietveld分析相结合，是对热门，旁路，窑，熟料，熟料和水泥进行定量相分析的最强大技术。

Combined with the XRD Method Package Cement the new D8 ENDEAVOR is the perfect solution for the industry.

It offers direct phase analysis along the entire production process, ranging from raw materials, intermediate products like hotmeal and dusts (REACH) to clinker and the finalized cements. Analytical highlights are the capability to distinguish the Alite polymorphs M1 & M3 and the quantification of amorphous phases by the proprietary PONKCS method.

The most direct method of mineral identification and quantification is powder X-ray diffraction (XRD) with the D8 ENDEAVOR Minerals.

Complex geologic materials can reliably be analyzed using TOPAS quantitative analysis.

Furthermore, cluster analysis techniques can be used to quickly and automatically analyze large amounts of data for similarities and generate exploration mappings.

X射线粉末衍射（XRD）是一种用于制造钢的过程和质量控制的广泛使用的分析方法。

了解原材料中的确切FEO浓度是减少铁植物的温室气体排放的关键。

The FeO amount can directly be calculated from the stoichiometry and concentration of the minerals. These values determined by rapid XRD makes it a very fast alternative to titration.

控制铝生产是一项至关重要的分析任务，需要强大的X射线衍射（XRD）解决方案。

This is due to the harsh environment in a smelter, where the XRD instrument needs to be located, and the enormous sample throughput required to successively probe hundreds of smelter cells.

D8努力通过可靠的机制和技术创新来解决这些挑战，从而减少测量时间并扩大分析能力。

The D8 ENDEAVOR is best suited to monitor lowest amounts of free silica, a material that causes lung cancer and other severe health issues.

配备了Lynxeye Xe-T检测器的D8努力实现最高精度和最低的检测极限。

To complete the silica solution, Bruker offers sample holders for different filter types and a complete method for the DIFFRAC.DQUANT software, which is compliant with NIOSH 7500 requirements and also allow segment calibrations.

Sample preparation efforts for the D8 ENDEAVOR are minimal, as a wide range of sample sizes and types can be handled simultaneously. The gripper that loads the specimen holders from the magazine to the measurement position automatically detects different heights of specimen holders.

• Specimen holders have industry standard diameters of 51.5 mm (2’’) or 40 mm (1.6‘’)
• 细颗粒粉被填充到与样品量相匹配的各种直径或深度的样品固定腔中。
• Back-loading is available to reduce preferred orientation.
• Very small amounts of powder can be prepared on background-free holders.
• Specialized holders for filters, clays, solids, and environmentally sensitive samples are further options of a broad choice.

全功能且没有折衷的五件套件软件包提供了最简单的测量方法创建和最强大，最准确的分析结果。如果需要，所有这些都涵盖了21CFR Part11的合规性。五框测量中心,diffrac.eva对于一般数据评价和聚类分析,but also the COD database for phase identification are always included with two licenses for industrial laboratories and 10 licenses for academic users. Additional licenses are optionally available.DIFFRAC.TOPASis used for the quantification of complex multi-phase mixture, whereasDIFFRAC.DQUANToffers norm compliant analysis for the industry that are based on calibrations, and therefore most precise.

对于工业必威东盟体育过程和质量控制，D8 Endeavor可以配备TOPAS烧烤，以进行自动黑匣子量化。另外，我们还提供Bruker交钥匙套餐，以分析由我们的水泥应用专家准备的10种现成方法。必威手机客户端diffrac.suite软件可以在文件或数据库模式下运行，并包括用于多样本报告和时间序列表示的结果管理器。