CS/ONH-Analysis (CS/ONH)

G4 ICARUS Series 2

Outstanding Performance with Industry-proven Usability

清洁,快速有效燃烧:ZoneProtect™

HighSense™: High Performance UV-Absorption for SO₂

HerostageG4ICARUS

Punti salienti

碳和硫磺燃烧——重新定义了大学que Innovations

3 µm
Pore size
of the high-efficiency dust filter ensures improved stability and a clean workplace
< 60 s
Cycle time including cleaning cycle
ZoneProtect™ ensures a clean, fast & efficient combustion while any dust is disposed into the crucible by the integrated automatic cleaning system
10
times better signal to noise ratio
As UV-absorption is much more efficient than IR absorption, HighSense SO₂ detection delivers 10 times better S/N ratio, 5 decades of linear dynamic range with umost stability not affected by temperature variations.

研究的多功能性以及行业可靠性的可靠性

The combustion analyzer G4 ICARUS Series 2 with high frequency (HF) induction furnace and HighSense™ detection stes new standards in for a rapid and precise carbon (C) and sulfur (S) analysis in inorganic solids.

Due to their impact on the material properties, the need for fast and reliable CS analysis is not limited to iron and steel but also applies to ferrous and non-ferrous metals, their alloys, ceramics, ores, cement, limestone and numerous other inorganic solids.

  • ZoneProtect™:获得专利的燃烧区设计利用了气体提取喷嘴,确保了对样品的最佳氧气供应,而解放的气体和灰尘颗粒则立即通过喷嘴清除。
  • The unique, fully automatic cleaning system with brush-free dust removal ensures simultaneous cleaning of the inline high efficiency dust filter and the gas extraction nozzle while transferring accumulated dust into the crucible for disposal.
  • HighSense™检测:latest innovations in the field of high-performance light-emitting diodes (UV-LED), enabled the development of a SO₂ detector with outstanding performance: Lowest detection limits and an ultra-wide linear dynamic range are specific benfits of this technique. All Bruker detectors work without any moving parts and are equipped with integrated reference beam channels to eliminate drifts and provide utmost baseline and calibration stability.

Benefici

Why do I need combustion analysis?

When time to result matters, while accuracy must be granted in the first shot, with minimum sample preparation, combustion analysis is irreplaceable for the analysis of light elements. These are difficult or impossible to measure by direct spectroscopic methods, especially when embedded in difficult matrices. E.g. the G4 ICARUS Series 2 delivers accurate reults even in grey cast iron, where carbon is unevenly distributed in form of graphite clusters, because it applies a volumetric methods - analyzing the entire sample.

Watch the new video on carbon & sulfur

Applicazioni

Specifiche

G4 ICARUS Series 2 Specifications

Specification Benefit

Samples

Sample Types


Inorganic, dry, any form or shape

Flexibility
Typical Samples
Ferrous and nonferrous metals and their alloys, ores, cement, limestone, glass, ceramics, soils 各种样品材料必威手机客户端
Sample carrier
Ceramic crucibles (standard form) Usage of industry standard consumables, lower cost, security of supply
Sample weight
0.1 – 1 g (typical 0.5 g)
Furnace High frequency induction furnace, power adjustable with ZoneProtect™ More efficient, faster combustion with maximum productivity

Detectors


Carbon

Sulfur

Dual-range NDIR detector with reference beam path


HighSense™nduv²)检测器带有参考光束路径

Reliable, maintenace-free performance without drift


Unique wide range performance with unrivaled signal/noise without drift
载气 Oxygen 99.95% purity
(99.995% required for trace carbon)
3.5 bar (50 psi) min. pressure
Standard gas purity sufficient
压缩的空气 5 bar (72.5 psi) min. pressure, oil-, water- and particle-free

Speed

Analysis Time
40 s (nominal)
Fast, simultaneous analysis
Complete Cycle Time
< 1 min (typical) High productivity and throughput with waste disposal into crucible
噪声排放 < 50 db Enjoy the silence
校准 Single and multipoint calibration with solid standards
Reagents
  • Magnesium perchlorate
  • Sodium hydroxide on support
  • Platinized silica
Power Supply

230 VAC (± 10 %); L1 N; 50-60 Hz; 16 A; 2.7 kVA


208 VAC (± 10 %); L1 L2; 50-60 Hz; 16 A; 2.7 kVA
行业标准功率和当前配置
*) NDIR-based detector available on request

Webinar

Supporto

Service & Support

We provide:

  • Help desk support from highly-skilled troubleshooting professionals, to isolate and resolve hard- and software problems
  • Web-based remote instrument service for service diagnosis and applications support
  • Merged reality support – a virtual engineer at your side (video)
  • 根据您的要求,计划维护
  • Customer on-site repair and maintenance service
  • Spare parts availability typically over night or within a few working days worldwide
  • Compliance services for installation qualification, operational qualification / performance verification
  • 现场计划和搬迁
  • Find your next培训课程

Check out oursupport websitefor:

  • Software updates
  • Product manuals & installation guides
  • 培训视频

需要注册。