Clean, Fast & Efficient Combustion: ZoneProtect™
HighSense™:SO₂的高性能UV吸收吸收
具有高频(HF)感应炉和HighSense™检测的燃烧分析仪G4 ICARUS系列2为无机固体中的快速而精确的碳(C)和硫(S)分析,以实现新标准。
由于它们对材料特性的影响,对快速和可靠的CS分析的需求不限于铁和钢,还适用于亚铁和非有产金属,其合金,陶瓷,矿石,水泥,石灰石和许多其他无机固体。
When time to result matters, while accuracy must be granted in the first shot, with minimum sample preparation, combustion analysis is irreplaceable for the analysis of light elements. These are difficult or impossible to measure by direct spectroscopic methods, especially when embedded in difficult matrices. E.g. the G4 ICARUS Series 2 delivers accurate results even in grey cast iron, where carbon is unevenly distributed in form of graphite clusters, because it applies a volumetric method - analyzing the entire sample.
规格 | 益处 | |||
Samples |
无机,干,任何形式或形状 |
灵活性 |
||
Typical Samples |
Ferrous and nonferrous metals and their alloys, ores, cement, limestone, glass, ceramics, soils | Wide variety of sample materials | ||
Sample carrier |
陶瓷坩埚(标准形式) | 使用行业标准消耗品,较低的成本,供应安全性 | ||
样品重量 |
0.1 - 1 g(典型的0.5 g) | |||
炉 | 高频感应炉,可通过ZoneProtect™调节功率 | 更高效,更快的燃烧效率 | ||
探测器
硫 |
带有参考光束路径的双范围NDIR检测器
|
可靠,无维护的性能而无需漂移 Unique wide range performance with unrivaled signal/noise without drift |
||
Carrier Gas | 氧气99.95%纯度 (微量碳所需的99.995%) 3.5 bar(50 psi)分钟。压力 |
标准气体纯度足够 | ||
Compressed air | 5 bar(72.5 psi)分钟。压力,油,水和无颗粒 | |||
Speed Analysis Time |
40 s(名义) |
Fast, simultaneous analysis | ||
完整的周期时间 |
< 1 min (typical) | High productivity and throughput with waste disposal into crucible | ||
Noise Emission | < 50 db | 享受安静 | ||
Calibration | Single and multipoint calibration with solid standards | |||
试剂 |
|
|||
Power Supply | 230 VAC (± 10 %); L1 N; 50-60 Hz; 16 A; 2.7 kVA 208 VAC (± 10 %); L1 L2; 50-60 Hz; 16 A; 2.7 kVA |
Industry standard power and current configurations | ||
*)根据要求提供基于NDIR的检测器 |
We provide:
看看我们support websitefor:
Registration required.